Bluetooth 2000mAh 7.4Wh Smart Handheld RFID Reader IC ID Card Reader Writer

The iCopy-XS is a super automated handheld RFID copier based on Proxmark3 technology. This advanced device can read, crack, duplicate, sniff, and simulate RFID cards without requiring a PC connection.

Currently supporting the widest range of RFID systems in the world, the iCopy-XS can read up to 39 types of RFID system cards and copy up to 37 types of RFID cards.

• Battery capacity: 2000mAh 7.4Wh
• Charging interface: USB Type-C double-sided charging
• Charging power: 10W (MAX)
• Charging time: 2 hours
• OTG function: Supported
• Standby time: 4.5 hours

• CPU technology: Cortex-A7
• CPU frequency: 600MHz
• GPU: ARM Mali
• Memory options: 256MB+4GB, 256MB+8GB, 256MB+16GB

1. Auto Copy: Automatic scanning, reading, and writing of all information from original RFID Tag to a new UID card/tag
2. Scan Tag: Scanning of tag to retrieve basic information about the tag type
3. Read Tag: Reading of all available information from tag (including blocks and sectors)
4. Sniff Traffic: Sniffing of locked sector keys for cards/tags
5. Simulation: Simulation of Low and High Frequency RFID Tags

6. PC-Mode: Enter expert mode for advanced operations
7. Backlight: Control screen backlight ON/OFF
8. Diagnosis: Run various tests to check device status
9. Volume: Adjust device volume
10. About: View serial number and firmware update information

The innovative PC-Mode allows for professional operation. After connecting to a computer, open the client in the built-in USB drive to directly use Proxmark3 universal CMD commands for advanced device control.